Requirements for operating China GSHZ rotary grille decontamination machine
Release time:
Jan 11,2023
1. Before starting the China GSHZ rotary grille decontamination machine, the shaft handle must be rolled at the tail of the motor. The rake teeth can move normally and there is no noise vibration before starting the machine, and the shaft handle should be removed.
Requirements for operating China GSHZ rotary grille decontamination machine:
1. Before starting the China GSHZ rotary grille decontamination machine, the shaft handle must be rolled at the tail of the motor. The rake teeth can move normally and there is no noise vibration before starting the machine, and the shaft handle should be removed.
2. Before starting the China GSHZ rotary grille decontamination machine, first test whether the working direction of the motor is the same as that of the rake teeth of the equipment, and then it can be put into work after everything is normal.
3. During the working process of China GSHZ rotary grille decontamination machine. If there are fibers and impurities blocking the rake tooth chain, it should be cleaned up in time to avoid affecting the normal operation of the equipment. Then, according to the amount of waste, the waste hanging on the unloading plate should be cleaned regularly.
4. If the motor works normally but the rake teeth do not work during work, it means that the safety pin is cut off due to overload, and the power supply needs to be cut off to replace the overload safety pin.
5. The maintenance and overhaul of the gearbox should be carried out in accordance with relevant regulations, and butter can be added to the bearings and chains every month.
As long as you pay attention to its maintenance methods when using China GSHZ rotary grille decontamination machine daily, you can prolong its service life.
key word:
Recommended news
Feb 13,2025
Contact Information
No. 192, East Bianzhong Road, Chengqiao Street, Liuhe District, Nanjing
