Victor

PRODUCTS CENTER

/
/
Central Drive Suspended Mud Scraper

Cases

Product Categories
c41-1
c41-2
c41-3
c41-1
c41-2
c41-3

Central Drive Suspended Mud Scraper

The suspended central drive mud scraper is suitable for the collection and removal of sludge and the removal of scum in the radial flow sedimentation tank in the sewage treatment project. It is a central drive suspension structure and does not require a central buttress, simplifying the civil structure. Commonly used in the pool body diameter in the range of 3 meters to 16 meters.
Product serial number
Product description

1. Brief introduction of central drive suspended mud scraper

The suspended central drive mud scraper is suitable for the collection and removal of sludge and the removal of scum in the radial flow sedimentation tank in the sewage treatment project. It is a central drive suspension structure and does not require a central buttress, simplifying the civil structure. Commonly used in the pool body diameter in the range of 3 meters to 16 meters.

2. Technical Parameters of Central Drive Suspended Mud Scraper

3.the characteristics of the central drive suspension mud scraper

1. The equipment is a central drive suspension structure, does not need central buttresses, has no requirements for the levelness and strength of the road surface around the pool top, and has a simple structure.

2. The structure is simple and easy to maintain, and the operating cost is low.

3. Double overload protection, reliable work.

4. It can further separate the free water in the concentrated sludge to reduce the sludge volume, improve the sludge thickening effect, and help improve the sedimentation efficiency.

4.the structure and working principle of the central drive suspension mud scraper

The suspended central drive mud scraper consists of a vertical reducer with a motor, a slewing bearing, a main shaft, a scraper arm, a scraper, a steady flow cylinder, and a control cabinet.

The scraper arm is driven by the drive device to rotate around the central axis, and the scraper on the scraper arm pushes the sludge deposited on the bottom of the pool from the outside to the center of the pool. During operation, due to accidental reasons such as the scraper and scraper arm being jammed by foreign matter or excessive mud accumulation, the transmission is over-torque, and the over-torque protection mechanism acts, cuts off the power supply, and automatically alarms and shuts down.

5. Operation instructions of central drive suspended mud scraper

1. Preparatory work before starting up: Check whether the reducer is refueled to the normal oil level, whether there is any foreign matter stuck in the operating part, and there should be no foreign matter such as wood blocks on the water surface to avoid malfunctions during operation.

2. Turn on the motor power and check the forward and reverse direction.

3. The oil in the reducer needs to be changed once after one month of use, and only once a year in the future.

4. Always pay attention to whether the equipment is operating normally during the operation of the equipment. If problems are found, the operation should be stopped in time for inspection.

Keyword:
Central drive suspended mud scraper
Previous
Next

Related Cases

What help do you need?

We sincerely welcome domestic and foreign guests to discuss cooperation.

万能表单

默认万能表单

意向信息

意向信息

联系信息

联系信息
yzm

Victor Vic Environmental Technology

Our aim is to build green mountains and clean water and actively devote to building a harmonious and beautiful globe with everyone.

Contact Details

No. 192, East Bianzhong Road, Chengqiao Street, Liuhe District, Nanjing

Copyright © 2021 Nanjing Victor Environmental  Technology Co., Ltd.  All rights reserved.    

苏ICP备19051748号-1     Powered by 300.cn