Victor

PRODUCTS CENTER

/
/
Driving Rake Scraper

Cases

Product Categories
c38-1
c38-2
c38-3
c38-1
c38-2
c38-3

Driving Rake Scraper

The driving rake scraper is often used for the mechanical discharge of the sludge in the advection sedimentation tank. It can be divided into two forms: the same-flow mud scraping and the counter-flow mud scraping. It is mainly composed of platform, transmission device, hanger, guide rail, mud scraping device, lifting device, electrical control system and stroke control device.
Product serial number
Product description

1. Introduction of driving rake scraper

The driving rake scraper is often used for the mechanical discharge of the sludge in the advection sedimentation tank. It can be divided into two forms: the same-flow mud scraping and the counter-flow mud scraping. It is mainly composed of platform, transmission device, hanger, guide rail, mud scraping device, lifting device, electrical control system and stroke control device.

2. Technical parameters of driving rake scraper

3. Working principle of driving rake scraper

The mud scraper is composed of driving, mud scraping rake, skimmer board, driving device and automatic teller.

1. The two tanks have one end: the scraper goes down, and the scum board goes down. 1. The mud scraper travels from the beginning of the pool (outlet end) to the end of the mud and slag tank, scraping and transporting the sludge and scum until the end (in Water end)-The scraper rake is lifted up, the slag skimmer board is lifted-the scraper terminal changes to the starting end-when it reaches the starting end, it stops or performs another cycle.

2. Two troughs are provided at two ends: the scraper rake descends, and the slag skimmer board is lifted. The scraper drives from the starting point of the water outlet to the end of the mud trough, scraping and transporting the sludge until the end-the scraping rake is lifted and skimmed The slag board descends-the scraper reverses to drive to skim the scum to the scum tank-when it reaches the beginning, it stops or performs another cycle.

4.the scope of application of the driving rake scraper

The driving rake mud scraper can be mainly used in places such as bacterial pollution, scale residue, factory water chlorine, chemical pollution and so on.

5. Precautions for installation of driving rake scraper

1. In order to make the driving mud scraper operate normally and effectively, the four driving wheels must be installed on two parallel sides, and the rail steel must be on the two sides of the rectangle and on the same horizontal surface.

2. When installing this equipment, prepare necessary supplies such as cranes, scaffolding, etc., as well as various installation tools and measuring supplies

3. Keep the oil mark position of the reducer lubricating oil when the mud scraper and slag skimmer is in operation. Oil-filled bearings 1-2 times a month.

4. Before starting the machine, check whether the lifting wire rope is dirty, and whether the lifting limit tightening screw is firm to avoid misoperation.

5. Check whether the connection of water parts is loose.

6. Check that the rubber scraper should be replaced when it is severely worn and corroded.

7. Overhaul once a year.

Keyword:
Driving rake scraper
Previous
Next

Related Cases

What help do you need?

We sincerely welcome domestic and foreign guests to discuss cooperation.

万能表单

默认万能表单

意向信息

意向信息

联系信息

联系信息
yzm

Victor Vic Environmental Technology

Our aim is to build green mountains and clean water and actively devote to building a harmonious and beautiful globe with everyone.

Contact Details

No. 192, East Bianzhong Road, Chengqiao Street, Liuhe District, Nanjing

Copyright © 2021 Nanjing Victor Environmental  Technology Co., Ltd.  All rights reserved.    

苏ICP备19051748号-1     Powered by 300.cn