GSJ/QSJ Type Hyperboloid Mixer
key word:：
GSJ/QSJ Type Hyperboloid Mixer
Category：
- Details
-
1. Brief Introduction of GSJ/QSJ Hyperboloid Mixer
In municipal, chemical papermaking and other water treatment processes, water mixing is one of the key processes. Traditional mixing machinery is divided into two common methods: vertical shaft folding paddle type and horizontal (submersible) type.
Since the method of installation and the form of the blade determine its mixing form, both in terms of energy consumption and mixing effect are not ideal, which not only brings unnecessary increase to the operating cost of the sewage plant, but also directly affects the better The final processing effect.
2. Technical Parameters of GSJ/QSJ Hyperboloid Mixer
model
Impeller diameter
(mm)
speed
(r/min)
power
(kW)
Service area
(m)
weight(kg)
Stainless steel
FRP
G/QSJ500
500
40--250
0.75--1.5
1--3
320
300
G/QSJ1000
1000
30--80
1.1--2.2
2--5
700
500
G/QSJ1500
1500
30--60
1.5--3
3--6
850
600
G/QSJ2000
2000
20--42
2.2--4
6--14
1100
650
G/QSJ2500
2500
20--40
3--5.5
10--18
1200
700
G/QSJ3000
3000
20--30
4--7.5
12--22
1250
900
3. Features of GSJ/QSJ Hyperboloid Mixer
1. It can be used in the occasions where various liquids are mixed with solids and gases. The existing mixing equipment can achieve three-dimensional and spiral mixing, so that the mixing is more uniform and the mixing efficiency is improved.
2. Large specific surface area impeller, small power equipment, large circulating water flow, low energy consumption, and 30%-50% energy saving than traditional mixing methods.
3. The whole machine has compact structure, reliable operation and convenient installation and maintenance.
4. The impeller is made of reinforced fiber or steel material, which can adapt to different working conditions and has a long service life.
4. Application of GSJ/QSJ Hyperboloid Mixer
GSJ/QSJ type hyperboloid mixer is a product developed by our company. It is widely used in environmental protection, chemical, energy, light industry and other industries where liquids need to be exchanged between solid, liquid and gas. It is especially suitable for nitrification in coagulation tanks, regulating tanks, anaerobic tanks, and aeration tanks in sewage treatment processes. Stirring and mixing with denitrification tanks and various abrasive and high-temperature media.
5. Maintenance of GSJ/QSJ Hyperboloid Mixer
1. The lubricating oil of the reducer needs to be replaced after the new machine starts to operate for 200 to 300 hours, and the internal oil stains should be cleaned. In the future, it can be replaced once within six months to one year. For details about the use of the geared motor, please refer to the manufacturer's maintenance manual.
2. Regularly check whether the mixing shaft lock nut and each connecting bolt are loose.
3. Regularly check the vibration of the mixing shaft, and remove the windings on the impeller and shaft in time.
4. Regularly check for abnormal sound and temperature rise of the transfer parts.
5. Regularly check for abnormal changes in current.
6. After the equipment is not working for a long time, check the insulation of the motor before turning it on again. At the same time, prevent the sediment from being deposited for a long time, which may cause difficulty in starting and damage the motor and impeller.
7. The above inspection should be recorded, and if there is any abnormal situation, you can contact our company.
6.Structure Introduction Of the GSJ/QSJ Type Hyperboloid Mixer
G/QSJ hyperboloid mixer is composed of driving device, hyperboloid impeller body and installation accessories. In order to meet the user's use under different working conditions, the installation is divided into two types: dry type (also called vertical shaft type) and submersible type.
Dry installation : the drive device is fixed on the working bridge, and the kinetic energy is transmitted to the impeller part in the medium through the transmission shaft. It is used in the liquid with high solid content, high water temperature and abrasiveness. Because the impeller has the function of automatic deviation correction , the operation is relatively stable, and the noise of the reducer is less than 60 decibels.
Submersible installation can eliminate the need for bridges. It adopts diving power and uses the self-weight of equipment for positioning. It is flexible and convenient to install. It is suitable for deep water with stable water quality and no abrasive water. The water temperature is not more than 40℃, and the pH value is between 6~9. It is characterized by no noise and no visual disturbance.
7.Installation Diagram Of GSJ/QSJ Hyperboloid Mixer
Product inquiry
Contact Information
No. 192, East Bianzhong Road, Chengqiao Street, Liuhe District, Nanjing
